T6193 Maintenance Tank Chip Resetter For Ep F6000 F6070 B6000 B6070 B7000 B7070

Description

T6193 Chip Resetter For Maintenance Tank For Epson SureColor F6000 F6070 B6000 B6070 B7000 B7070 P10000 P2000 T3200 T3270 T5270
Product Instruction
Product Name : Maintenance Ink Tank Chip Resetter / Waste Ink Tank Chip Resetter
Product number :T6193 Maintenance Tank Chip Resetter
Suitable chip number : T6193 & T619300
Suitable printers:
For Epson SureColor T3000 / T5000 / T7000
For Epson SureColor T3070 / T5070 / T7070
For Epson SureColor T3200 / T5200 / T7200
For Epson SureColor T3270 / T5270 / T7270
For Epson SureColor T3050 / T5050 / T7050
For Epson SureColor T3080 / T5080 / T7080
For Epson SureColor T3280 / T5280 / T7280
For Epson SureColor F6000 / F6070 / F6080
For Epson SureColor B6000 / B6070 / B6080
For Epson SureColor B7000 / B7070 / B7080
For Epson SureColor P10000 / P10080
For Epson SureColor P20000 / P20080
Condition : Both the original chips and our compatible chips can be reset
Feature : Reset chip capacity to reuse,easy to use
and saving printing costs
Warranty : 1:1 Replace Any Defective
The T6193 Chip Resetter is used to reset the chip for Epson maintenance tank,both the original chips and our compatible
chips can be reset.Reset Chip Capacity to reuse,easy operation and saving printing costs.
Note:Please reset the chip before the remaining ink falls to 15%.
Use chip resetter to reset the chips,follow these steps:
1.There are 9 terminals on the chips, only the
7 terminals inclosed with the red marker are useful.See picture below:
2.Align the seven pins on the resetter with the
seven contacts on maintenance tank chip.
3.Press down on the resetter, the LED lights will
flash red at first.
4.Keep pressing 3-5 seconds,the LED light will
change from red to green.
It indicates you successfully reset the chip.
Important:
Don't put the maintenance tank (which was been reset) directly to the printer.
1.Install another maintenance tank which was not been reset on the printer first.You can use our compatible one time chip,or you
can use another original chip not resetted.
2.Take out this maintenance tank after the printer recognized it.
3.Put the maintenance tank (which was been reset) back to printer,now you can see the ink level is full.
4.It is better reset the maintenance tank chip before the printer show ink level is 15% every time.
SHIPPING: we ship the item by DHL\FEDEX to worldwide, very fast !!